Thursday, March 31, 2016


Hello friends, Welcome to my blog!! Today am sharing a  mixed media canvas based on the theme "Flowers". I spotted these cute mini canvases when I had been to Daiso Japan last weekend .
I applied a coat of gesso to the canvas and used acrylic paints of pink, orange and red colors with water spray. I dabbed some paints and then sprayed water upon them to get a drooling effect. Once it was dried I started making random textures using Liquitex texture paste and stencils. I had few scraps of pattern paper left over after using it for the sewing machine project. So pasted those upon the canvas. 
All the flowers are handmade using recollections punches and the lace is crocheted using i hook and wool. The black hearts are hand cut from empty cereal cartons and colored using black acrylics. The sentient is handwritten. 
Hope you all liked my canvas!! See you soon with another interesting post.

Entering this project to the following competitions:
4 crafty chicks - " Anything goes"
Lessology challenge - " Hand lettered love" - The sentiment is handwritten and the black hearts are made by recycling empty cereal cartons.
Stamplorations challenge -

We love to create challenge blog - " Anything creative/ Mixed media
Anything but cute challenge -  " Crazy for color "- I have used vibrant colors and lots of flowers in my project. 

Friday, March 18, 2016


Hello friends, Welcome to my blog!! Today I have an interesting post to share with you all.  I maintain a craft journal/ dairy where I write down the list of things that I wanted to try new.  Usually while making a project I try to incorporate something from the list. In this jewellery I have used three new techniques which was pending in my wish list for a long time. 
After seeing all the adult coloring books with Mandala designs I too wanted to draw and color a Mandala pattern. This month at earrings everyday challenge the inspiration pictures are about " arabesque art" - an intricate geometric art found on the ceiling of the Mosques. Those stunning patterns reminded me of Mandalas so I decided to make these earrings. 
For the base of the earring instead of clay I used paper ( one more thing from my wish list). I stacked 20 pieces of circular sheets to create a thick base.  I drew the design using black pen and colored using acrylics. After decorating it with the rhinestone chain I felt the earring was incomplete. A closer look at the inspiration picture gave me the idea to use clear resin which I had bought long time back but didn't use it. 
I followed the tutorial of Art'zire and did my maiden attempt in casting the resin.I wasn't satisfied with the result as a small amount of resin leaked from the edges of the rhinestone chain. I should have sealed the edges to make it non-porous. Hope to get better next time. I thank earrings everyday for their awesome inspiration which motivated me to try many new things. Hop on to their blog and have a look at the gallery of inspiration from other artists. 

Submitting to 
1. Earrings everyday - I was inspired by the colors and geometric patterns.

Tuesday, March 15, 2016


Hello Friends, Welcome back to my blog!! Today am sharing with you all a special post made for a special person in my life. It is a beautiful journey of us together from the day I was born. She is my best friend, my source of strength and my pillar of support. Hope you would have guessed it !! Yes , this post is a small dedication to my mom for her birthday.

I was thinking for many weeks what I will gift her this year. When she told me few days back that she is altering some of my dresses I got the idea of making sewing machine shaped card for her as she loves stitching.
There are lot of cute memories associated with this sewing machine. My mom learnt sewing after I was born so that she could stitch variety of dresses for me. She used to stitch frocks with flowers and dolls of my favorite color. Later in life she got busy juggling between office and household that she didn't have time to pursue her hobby. Few months back she mentioned that she wanted to learn sewing again. I hope this card will motivate her to sew more. 
I used my sewing machine ( brother - xl2600 i) as a reference to create this card . For making this card I used canvas paper as they are thick and sturdy. For the base ( bobbin cover area) I have recycled an empty phone packaging box. I have used DCWV - once upon a time paper pack for covering the whole card. At the edges I have glued black lace from recollections.  

I made the stitch selector dial by using a circular piece of packaging cardboard and plastic bottle cap. For the hand wheel at the side I recycled an empty ribbon spool. The spool pin / thread spool is made up of empty tissue roll and cardboard pieces. I used push pins for the stitch length adjustment lever. 
The borders around the selection dial and thread guide are hand crocheted using i hook. For the needle I have used a toothpick colored in black. The spool storage box is made using the recollections card stock.

All the flowers are handmade using recollections punches. The leaves are hand cut from glitter foam sheet and card stock. The piece of cloth kept under the needle is the leftover from our ( mom and me) first sewing project together. Instead of a printed or stamped sentiment I decided to try my hands on calligraphy writing. These are my first attempts of calligraphy fonts using rolling ball pen ( gel pen). I followed the tutorial of  Julie Turrie .


Draw the shape of a sewing machine on a canvas paper and cut 2 pieces - for front and back. Make sure the backside is slightly bigger than front. Cut slits on the front piece for the thread guide and stitch length adjustments. Cover it with the pattern paper. 

To make the box first measure the length of the front piece. For curved portions measure the length using thread and scale method. Now cut a strip from a card stock measuring the length measured and width 2.5". Mark 0.5" up and down on the cut strip and draw a line. Make a fold on the line drawn and cut small slits as shown above. 

Glue one side of the slits to the front piece of the card. The slits make it easy to follow the curvy shape of the sewing machine.

Glue the back portion to the other side of the slits. Finally paste the whole thing upon a packaging box and decorate it of your choice.

Thanks for reading this long post patiently.Hope you all liked my card!! Come back soon for another interesting project. Do post your comments/suggestions.

Submitting this project to

1.Lulupu challenge blog - 4th birthday celebration - I made a birthday card and used the elements of  C2- buttons, pattern paper , glitter foam sheets and flowers.
2.Lessology challenge - "Hand lettered love" - All the sentiments here are hand written. I have recycled packaging carton , empty ribbon spool , plastic cap , tissue paper roll etc.
3. Country view challenge - " Industrial" - I have made a crafty sewing machine.
4.Dream valley challenges - " All about birthdays" - I made a sewing machine shaped card for my mom's birthday.
5.The craft place challenge blog - " Anything goes"